Contact: Susan
Email:Susan@tntoolcabinet.cn
Tel:+86-769-33227619
Mob:+86-13412357931
Fax:+86-769-85611224
Web: www.tntoolcabinet.cn
www.tnwarehousestorage.com
Address: Second Industrial Zone, Yangwu Village,
Dalingshan Town, Dongguan, Guangdong,China
Zip Code: 523839
mold storage racking system Technological Parameters:
1.The post adopts 10#channel steel, diagonal brace of post is 25*25square merers.
2.Rack of backing plate is 50*50 angle iron,board size of backing plate is 2mm iron plate.
3.Sliding chute is made of folding 4mm iron plate.
4.Bearing is model 6403.
5.Bearing capacity:800-1000kg/backing plates.
6. Drawer type mold rack With overhead crane bearing capacity 800kg.
7. mold storage racking system Colors:Customized.
8.Mainly used for storage of all kinds of mould
9. Could be assembled with manual movable carriage on each level.
10. Equipped with idler wheel rail on each level, thus the sliding shelf panel could be freely pulled out when loading.
11.Medium-duty Drawer type mold rack could carry less than 750kg per level, and the heavy-duty slide rack could load more than 1000kg per layer.
12..The entire rack is combined structure,
13..Can be dismantled easily and convenient for transportation, and the assembly is simple and fast.
Type |
mold storage racking system |
Material |
Cold rolled steel |
Dimension |
L3000*W615*H2000mm Design as your mold size |
Loading capacity |
1 ton-10 ton |
mold rack color |
Green or as you want |
Finishing |
Powder coated |
Delivery time |
15 days |
packed |
air bubble film or carton |
application |
heavy tooling, die, plastic injection mould,mold |
mold rack Features |
|